1. | It occupies less space due to integrated compact construction. |
2. | This machine contains PRE - COMPRESSED COLUMN - TENSIONED TIE ROD, resulting in following advantages over Simple Tie Rod Press. |
| • Quick Pressure Development during Extrusion and upset operations. • Rapid and Smooth De - compression after extrusion. • Minimizes/Nullifies variation in Tie Rod Stresses, thus eliminating "Fatigue" failures. • Better rigidity than simple Tie-Rod Press. • Provides Solid support to the guides of container and moving cross head. • Alignment is perfectly maintained due to proper location of parts. • The sagging of Tie Rod due to weight of container and moving cross head is totally eliminated. • Ensures perfect parallelism between end plate and cylinder. |
3. | Grade Steel Casting is used for Single Piece Cylinder, End Plate, Container Housing and Moving Cross Head give better performance. |
4. | The main Ram and all other Rams in the press are Hardened and Ground. |
5. | Container is located in single piece container housing resulting in easy and quick removal of container from housing. |
6. | Three position Die-slide with two Die stations for loading, from both sides of the Press and a Center hole position for pushing through the stuck billet as standard. |
7. | Hydraulically Operated Shear Slide with adequate guide length. |
8. | Loader is provided to load Billet and Dummy in presses, which has capacity 600 m Tonn or more than it. |
9. | Stem (Moving Cross Head) and container can be aligned accurately because of adjustable flat 'X' Guides which are located on the top and bottom columns. |
10. | The Hydraulic system is built with the use of logic valves resulting in fast response and minimum internal leakage. |
11. | The manifold construction reduces the clumsy piping and the oil leakage. |
12. | Higher/lower Extrusion speeds against specific requirements. |
13. | Centralized Lubrication System for Main Ram, Container, Shear and Die slide guides. |
14. | Rubber components like Oil Seals, 'O' rings etc. suitable for Cavities. |
15. | Operation is smooth and fully automatic through Push Buttons. For that Pendent Mounted Push Button Station is provided. |